Category Archives: Diagnostics & Maintenance

Bad EVAP Vent Solenoid: Symptoms, Testing, and Whether You Can Drive

A bad EVAP vent solenoid may stop controlling airflow into and out of the evaporative-emissions system, or it may stick open or closed. That can contribute to an EVAP leak, trigger the check-engine light or, in some cases, make refuelling difficult. These signs do not prove the vent solenoid is faulty: wiring, a blocked passage,… Read More: Bad EVAP Vent Solenoid: Symptoms, Testing, and Whether You Can… »

2007 Toyota Camry Hybrid P0A7A Code: Inverter Meaning and What to Do

On a 2007 Toyota Camry Hybrid, P0A7A is identified as Generator Inverter Performance. It means the hybrid control system has detected a performance problem in the generator-inverter system; it does not, by itself, confirm that the inverter, generator, transaxle or hybrid battery has failed. What P0A7A Means on a 2007 Camry Hybrid The inverter is… Read More: 2007 Toyota Camry Hybrid P0A7A Code: Inverter Meaning and What… »

P0706 Code Symptoms: Causes, Diagnosis, and What to Do

P0706 can cause difficulty selecting or changing gears, delayed engagement, an incorrect gear indication, or trouble starting, but some vehicles show no obvious symptoms. The code means the vehicle’s control system has detected a transmission range-sensor signal that is out of range or does not make sense for the selected gear. It does not, by… Read More: P0706 Code Symptoms: Causes, Diagnosis, and What to Do »

How to Fix a Secondary Air Injection System Malfunction: Diagnosis and P0410

To fix a secondary air injection system malfunction, diagnose the system before replacing the pump. The fault could involve the pump, its fuse or wiring, the relay, hoses, check valves, or air passages. A code such as P0410 points to a secondary-air-system problem, but does not prove that the pump itself has failed. Start by… Read More: How to Fix a Secondary Air Injection System Malfunction: Diagnosis… »

What Causes a Blown Head Gasket? Common Causes, Symptoms and What to Do

Engine overheating is the most common cause of a blown head gasket. Excessive heat puts stress on the gasket and can warp engine components, weakening the seal between the cylinder head and engine block. Overheating is not the only possible cause, however, and overheating can also occur after the gasket fails. What is the most… Read More: What Causes a Blown Head Gasket? Common Causes, Symptoms and… »

Honda Accord Passenger Airbag Light: Meaning, Status, and What to Do

The Honda Accord passenger-airbag OFF indicator means the front passenger airbag is switched off by the vehicle’s passenger-seat classification system. It is a status indicator, not necessarily the same thing as the instrument-panel SRS/airbag warning light. Whether OFF is expected depends on the seat’s occupancy and how the system classifies it; check the owner’s manual… Read More: Honda Accord Passenger Airbag Light: Meaning, Status, and What to… »

U0101 Lost Communication With the TCM: Meaning, Causes, Symptoms & Fixes

“Lost communication with the transmission control module” means that one or more vehicle control modules are not receiving messages from the TCM over the vehicle’s communication network. The diagnostic trouble code commonly associated with this fault is U0101. It identifies a communication problem; it does not, by itself, prove that the TCM has failed or… Read More: U0101 Lost Communication With the TCM: Meaning, Causes, Symptoms &… »

Can a Bad Battery Cause P0335? Causes, Diagnosis and Fixes

Yes, a weak battery may contribute to a P0335 code indirectly if low voltage while starting affects whether the engine computer receives a usable crankshaft-position signal. But P0335 does not prove the battery is bad, and it does not automatically mean the crankshaft position sensor has failed. The battery, connections, and sensor circuit all need… Read More: Can a Bad Battery Cause P0335? Causes, Diagnosis and Fixes »