
P0705 concerns transmission-range information; it does not prove that the range switch needs replacement. Start with the complete code and the exact Camry powertrain. The component description, wiring and diagnostic sequence must match that application.
What does the range switch do?
Toyota repair information for the 2019–2024 Camry UB80E transaxle describes a park/neutral position switch that reports selector position to the ECM. It lists P070513 for a circuit-open condition and P070562 for conflicting range signals, both associated with SAE P0705.
That example explains why recording the suffix matters. It does not establish identical tests or connector details for older Camrys, hybrids or other transmissions.
Where is the sensor?
Identify it through the component-location information for the fitted transaxle. Do not remove parts using a forum’s all-years location description. Ask the garage to identify the switch and the matching diagram before ordering anything. A transmission-speed sensor is a different component.
How should it be diagnosed?
For the cited UB80E application, the manufacturer procedure checks related fuses, supply and signal wiring, switch operation and connections to the ECM. It also includes repair confirmation and applicable registration or initialisation requirements. These checks explain why replacing the switch immediately can miss a circuit fault.
Ask the technician which test failed, what repair corrects it and how normal operation will be confirmed. Do not use a generic pinout, resistance figure or shifter-cycling sequence on an unidentified gearbox.
Can you drive with the code?
The code alone cannot establish roadworthiness. If the selected gear is uncertain, the indication disagrees with the selector or the vehicle moves unpredictably, stop using it and arrange qualified assistance. Describe the behaviour as well as supplying the scan report.
What determines repair cost?
A wiring repair, switch replacement and further control-system diagnosis have different costs. Obtain an itemised estimate tied to the demonstrated fault, rather than buying a part solely because P0705 is stored.
Editorial correction — 3 November 2026: Removed the forum-based universal location clue and replaced it with application-specific Toyota diagnostic context.
Source
Toyota repair-manual information hosted by Mitchell: 2019–2024 Camry UB80E, P070513/P070562